Valgro "DuKlean" dust collector system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners, which use disposable filters to remove dust. These Dust Collectors are specially designed for collection of dry ferrous dust generated from buffing and polishing and grinding process,
Features
- Mobile Portable dust collector system
- Low Noise: Below permissible noise level.
- High Filtering Efficiency.
- Cotton filter bags reducing fire hazards.
- Energy Saving: Less Power consumption.
- Standard Accessory: Flexible Pipe.
Table
| Model | DCS-0.5 | DCS-1 | DCS-2 | DCS-3 | DCS-5 |
|---|---|---|---|---|---|
| Motor | 0.5 HP 3 PH | 1 HP 3 PH | 2 HP 3 PH | 3 HP 3 PH | 5 HP 3 PH |
| CFM | 190 | 380 | 1070 | 2750 | 3900 |
| Suction In late | 1 x 73mm OD | 1 x 100mm | 2 x 100mm | 1 x 100mm | 1 x 100mm |
| Electricals | Terminal block | Terminal block | Terminal block | Terminal block | Terminal block |
| Shaker | Manual | Manual | Manual | Manual | Manual |
| Overall Dimensions | 475x650x850 | 540x750x 990 | 700 x 750 x 1500 | 700 x 750 x 2500 | 1000 x 1000 x 2500 |
| Nett. | 45 kg | 75kg | 130 KG | 280 KG | 425 KG |
Optional Accessory: Suction Covers as per job requirement. Electric Starter.
Kindly Note : The effectiveness of any type of Dust Collector depends on a number of factors such as the design of Suction Inlet, proximity of Suction Inlet to the point of dust generation & Suction in the direction of dust generation. The suction capacity of the Dust Collector viz: 1,2,3 HP as required. The efficiency available on Dust Collectors is 50 to 60% normally.
Note : Due to constant design improvement, we reserve the right to change design & specifications without prior notice.